The LFPH high-temperature resistant, high-flow-rate pleated Filter Cartridge uses meltblown microfiber modified polyester (PET) as the filter media, with a diameter of 6 mm.
A single 1-inch filter cartridge can have a maximum filtration area exceeding 6m², with a flow rate of up to 60m³/h. It features a stainless steel outer frame, a single-opening design, and...
A specially designed inside-out liquid flow direction ensures that all contaminant particles are trapped inside the filter element. Suitable for power plants.
Oil removal and filtration of high-temperature condensate such as heat network drainage and chemical condensate.
Design parameters
Specifications (diameter * length) | Design flow rate (m³/h) | Maximum flow rate (m³/h) | Filter area (m3) |
6"*20" | 15 | 40 | 3.3 |
6"*40" | 30 | 80 | 6.5 |
6"*60" | 45 | 120 | 8.5 |
Material Structure
model | LFPH |
equipment | PET |
Support/Guide Layer | Modified polyester (PET) |
End cap | Glass fiber reinforced polypropylene |
outer protective sleeve | PET |
Interface type
LFPH | 40 | PET | 0050 | E | S |
LFPH | length | Material | accuracy | sealing ring | Outer ring |
20=20" | PET | 0010 = 1μm | E = EPDM | S = Stainless steel frame | |
40=40" | 0030 = 5μm | S = Silicone rubber | B = PET wrapping tape | ||
60=60" | 0050 = 5μm | F = Fluororubber | S = PBT skeleton | ||
0100 = 10μm | |||||
0150 = 15μm | |||||
0250 = 25μm | |||||
0400 = 40μm | |||||
0700 = 70μm |
Working characteristics
Maximum operating temperature | 120℃ |
Maximum working pressure difference | 0.58 MPa @ 20℃ |
Recommend replacing pressure difference | 0.15Mpa@20℃ |
Typical application scenarios
Power plant heating network drainage |
Chemical condensate |
Other locations for high-temperature condensate filtration |
Ин вебсайт кукиҳоро истифода мебарад, то шумо таҷрибаи беҳтаринро дар вебсайти мо ба даст оред.
English
Portugues
Pусский
Français
العربية
ไทย
Indonesia
Melayu
Tiếng Việt
中文
қазақ
עִברִית
မြန်မာ
ພາສາລາວ
Filipino
o'zbek
Кыргызча
ខ្មែរ
Türkmenler
Телефон